Blow Molding System
5 Gallon Bottle Blow Molding Machine
This equipment can produce different types of food, cooking oil bottles, carbonated drinks, mineral water bottles, juice bottles, wine bottles, tennis balls can, cosmetic bottles, etc.
Main Features
- Four Servo Motor Drive makes the machine drive system fully electrical.
a.Servo drives Preform Feeding System;
b.Servo drives Preform Transfer System;
c.Servo drives Mold Clamping System;
d.Servo drives Stretch System. - Schneider Motion Control System
Mitsubishi PLC Servo System as the brain of the machine. PTO System (Pulse/Train/Output Servo Positioning Module) works on high-speed positioning, with higher speed, higher noise immunity, and precise positioning. - Mold Fixed by Drawer Design
Push the mold, fix the positioning screws. Mold changeover work can be easily done in a half-hour. - High efficient Infrared Lamp, Oven Constant Temperature Design.
a. The most advanced high-frequency Infrared Lamp, increases heating efficiency by 30%-50%.
b. Each layer of the lamp is separately controlled, with an assistant ruler on a machine.
c. Intelligent temperature control system.
Temperature detector feedback to PLC automatically, PLC makes an accurate judgment and then controls circulation air in the oven. It leads to constant temperature in Oven, free from voltage fluctuations and ambient temperature. It works when large ambient temperature difference (-28~45 ºC).
d. Preform self-rotation System, ensure every side of every preform is heated evenly, which ensures the quality of the blown bottle.
e. Neck Cooling in Oven.
Preform Necks are cooled by recycling water, which avoids neck deformation.
Product Parameter
| Container spec | Max volume | 20L |
| Max diameter | ∅280mm | |
| Neck size | ≤∅70mm | |
| Max bottle height | 420mm | |
| Max perform height | 280mm | |
| Theoretical output (BPH) | 300-400 BPH (300g) | |
| Molding spec | Clamping stroke | 320mm |
| Width of mold | 680mm | |
| Bottom stroke | 50mm | |
| Thickness of mold | 400mm | |
| Number of cavities | 1 | |
| other | Cavity pitch | 78mm |
| Power consumption | 30 KW | |
| Operation pressure | 0.8-1.0 Mpa | |
| Blowing pressure | 2.8-3.5Mpa | |
| Lamp layer | 12 layers | |
| Heating holder number | 76 pcs | |
| Heating area | 5 | |
| Rated power | 80KW | |
| High-pressure air consumption | 5.2 m³/min | |
| Main machine weight | 4.8T | |
| Main machine size | 3500X2100X2300(main machine) 4900X4000X2900(footprint) |